Nortel 3050 Command Reference Manual page 105

Table 26
HTTP Settings Menu Options (/cfg/ssl/server/http) (cont'd.)
Command Syntax and Usage
downstatus unavailable|redirect|reset
downurl <URL>
rewrite
securecook on|off
Copyright © 2007 Nortel Networks
.
/cfg/ssl/server <id> /http HTTP Settings Configuration 105
Note: When using the redirect feature, the VPN Gateway must be
configured to use a DNS server, and the responding DNS server must be
able to perform reverse DNS lookups. When the VPN Gateway performs a
reverse DNS query of the virtual server IP address (VIP), the resolved name
must match the domain name in the Host header of the client request. If
the DNS server is unable to perform reverse lookups, the domain name
can be configured on the VPN Gateway using the dnsname command (see
"/cfg/ssl/server <id> SSL Server Configuration" (page
Sets the type of behaviour when the HTTP server is down.
•
unavailable: Sends a HTTP 503 "Service Unavailable" message to the
client.
•
redirect: Lets you specify a redirect URL using the downurl command
(see below).
•
reset: Lets the client try to access the server again.
The default value is unavailable.
Lets you specify a URL to which the client should be redirected when the
HTTP server is down, e.g. http://www.example.com/downinfo.html.
This command is only available if the downstatus command (see above)
is set to redirect.
Displays the Rewrite menu. To view menu options, see
r <id> /http/rewrite HTTP Rewrite Configuration" (page
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
89)).
"/cfg/ssl/serve
116).