Nortel 3050 Command Reference Manual page 457

/cfg/sys/adm/https Browser-Based Management Configuration with SSL 457
/cfg/sys/adm/http Browser-Based Management Configuration
[HTTP Menu]
port - Set HTTP Server port
ena - Enable server
dis - Disable server
The HTTP menu is used for enabling/disabling browser-based
configuration of your VPN Gateway. To access the Browser-Based
Management Interface (BBI), enter the Management IP address assigned
to your NVG cluster in your web browser.
Table 199
HTTP Menu Options (/cfg/sys/adm/http)
Command Syntax and Usage
port
ena
dis
/cfg/sys/adm/https Browser-Based Management Configuration
with SSL
[HTTPS Menu]
port - Set HTTPS Server port
ena - Enable server
dis - Disable server
The HTTPS menu is used for enabling/disabling browser-based
configuration of your VPN Gateway through a secure SSL tunnel. To
access the Browser-Based Management Interface (BBI), enter the
Management IP address assigned to your NVG cluster in your web
browser.
Table 200
HTTPS Menu Options (/cfg/sys/adm/https)
Command Syntax and Usage
port
Copyright © 2007 Nortel Networks
.
Sets the port number to be used for browser-based NVG configuration
using the BBI.
The default port number is 80.
Enables the HTTP server used for browser-based configuration on the
VPN Gateway.
Disables the HTTP server used for browser-based configuration on the
VPN Gateway.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007