Nortel 3050 Command Reference Manual page 462

462 Command Reference
Table 203
User Menu Options (/cfg/sys/user) (cont'd.)
Command Syntax and Usage
caphrase <cert admin export passphrase> <confirm cert admin
export passphrase>
/cfg/sys/user/edit <username> Edit User Menu
[User <username> Menu]
The User <username> menu is used to set or change the login password
for a specified user. Only users with Administrator rights can perform this
tasks, and then only if the admin user is a member of the same group
as the other user. The groups menu option gives access to the Groups
menu, in which the group assignment for the specified users is set.
Copyright © 2007 Nortel Networks
.
Sets the certificate administrator's passphrase for encrypted private
keys in a configuration backup. As long as the admin user is a member
of the certadmin group (the default setting), the admin user is
prompted for an export passphrase to protect the private keys in the
configuration dump each time the /cfg/ptcfg command is used.
A certificate administrator export passphrase need only be defined if
the admin user has removed himself or herself from the certadmin
group, and added a certificate administrator user with certadmin
group rights. The certadmin export passphrase will then automatically
be used (without prompting the user) to protect the encrypted
private keys in the configuration backup when the /cfg/ptcfg
command is performed. Upon restoring a configuration backup from a
TFTP/FTP/SCP/SFTP server (/cfg/gtcfg), the user will be prompted
for the correct certadmin passphrase as defined using the caphrase
command.
Note: The caphrase menu command is only displayed when the logged
in user is a member of the certadmin group.
password -Login password
groups - Groups menu
cur - Display current setting
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007