Nortel 3050 Command Reference Manual page 173

Table 49
Tunnel Guard Menu Options (/cfg/vpn/aaa/tg) (cont'd.)
Command Syntax and Usage
agent
list
details on|off
Copyright © 2007 Nortel Networks
.
For more information about base profiles, extended profiles and client filters,
see the "Groups, Access Rules and Profiles" chapter in the Application
Guide for VPN.
The default action is teardown.
Displays the agents settings menu.
Lists all configured SRS rules.
Note: SRS rules can only be configured through the Browser-Based
Management Interface (BBI). See the "Configure Tunnel Guard" chapter in
the Application Guide for VPN.
Lets you specify whether or not Tunnel Guard SRS rule failure details
should be displayed to the user.
•
on: The details link is displayed on the Portal login page if the Tunnel
Guard checks fail and the action command (see above) is set to
teardown. When the user clicks the details link, more detailed
information about the cause of the failure is displayed in a separate
window. The on setting also enables printing the failure details in
a linkset text, using the <var:tgFailureDetail> variable. See
"Variables" (page 22)
Application Guide for more information.
•
off: The details link is not displayed. The <var:tgFailureDetail>
variable is not expanded.
The default value is on.
Note: This setting has no impact on the behaviour of the installed Tunnel
Guard agent, i.e. even if the setting is disabled on the NVG, it might be
enabled in the Tunnel Guard agent settings.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
/cfg/vpn <id> /aaa/tg Tunnel Guard Menu 173
and the "Configure Tunnel Guard" chapter in the