Nortel 3050 Command Reference Manual page 33

/info/events Events Menu
[Events Menu]
alarms - List all pending alarms
download - Dump the event log file to a TFTP/FTP/SFTP server
The Events menu is used for viewing active alarms and events that have
been logged.
Table 6
Events Menu Options (/info/events)
Command Syntax and Usage
alarms
download <method (TFTP/FTP/SFTP)> <host name or IP address>
<file name on host>
/info/hsm HSM Command
>> Information# hsm
iSD IP 192.168.128.185:
Mode: Extended
HSM card 0: Logged in as HSM-USER
HSM card 1: Logged in as HSM-USER
The output shows status information related to the HSM cards on each
NVG device in the cluster. Information about the current security mode
(Extended mode or FIPS mode) is displayed, as well as current login
status and login user information (HSM-SO or HSM-USER).
info/users Users Command
>>Main #/info/users
Number of currently logged in users:1
Copyright © 2007 Nortel Networks
.
Displays all alarms in the active alarm list by their main attributes: severity
level, alarm ID number, date and time when triggered, alarm name, sender,
and cause.
To alert the operator at system login, a notice is displayed if there are active
alarms.
Alarms are also sent as syslog messages.
Transmits the event log file from the NVG cluster to a file on a
TFTP/FTP/SFTP server. You need to specify the IP address or host name
of the server, as well as a file name.
The default value is tftp.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
info/users Users Command 33