Nortel 3050 Command Reference Manual page 431

/cfg/sys/host <id> /interface <id> /ports Interface Ports Configuration 431
/cfg/sys/host <id> /interface <id> /routes Interface Routes
Configuration
[Host Interface Routes Menu]
list - List all values
del - Delete a value by number
add - Add a new value
The Host Interface Routes menu is used to configure static routes for the
current interface, if required.
Any routes specified here will only be used for "private side" traffic, (for
example decrypted traffic bound for the intranet, requests to private
authentication servers and DNS servers), and only for VPNs that point to
this interface (using the /cfg/vpn #/adv/interfacecommand).
If no VPN points to this interface, routes specified here will be ignored.
Table 176
Interface Routes Menu Options (/cfg/sys/host/interface/routes)
Command Syntax and Usage
list
del <route by index number>
add <destination address> <network mask> <gateway address>
/cfg/sys/host <id> /interface <id> /ports Interface Ports
Configuration
[Interface Ports Menu]
list - List all values
del - Delete a value by value
add - Add a new value
The Interface Ports menu is used for listing the ports currently assigned
to the selected interface. The menu is also used for adding or deleting
ports to/from the selected interface. The interface ports configuration is
only applied to those NVG devices in the cluster that are equipped with the
physical port represented by the port number you specify.
Copyright © 2007 Nortel Networks
.
Displays all routes that are assigned to the currently selected interface.
Removes the specified route, currently assigned to the selected
interface.
Adds a route to be used by the currently selected interface.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007