Nortel 3050 Command Reference Manual page 458

458 Command Reference
Table 200
HTTPS Menu Options (/cfg/sys/adm/https) (cont'd.)
Command Syntax and Usage
ena
dis
/cfg/sys/adm/sshkeys SSH Host Keys Configuration
[SSH Host Keys Menu]
generate - Generate new SSH host keys for the cluster
show - Show current SSH host keys for the cluster
knownhosts - SSH known host keys menu
The SSH Host Keys menu is used to generate new SSH host keys for the
cluster. It also lets you display the current host keys in the CLI. To manage
known host keys, proceed to the SSH Known Host Keys menu.
For more information about SSH Host Keys and their usage, see Appendix
G, "SSH Host Keys", in the User's Guide.
Table 201
SSH Host Keys Menu Options (/cfg/sys/adm/sshkeys)
Command Syntax and Usage
generate
show
Copyright © 2007 Nortel Networks
.
Sets the port number to be used for browser-based NVG configuration
from the BBI using SSL.
The default port number is 443.
Enables the HTTPS server used for browser-based configuration on the
VPN Gateway using SSL.
Disables the HTTPS server used for browser-based configuration on
the VPN Gateway using SSL.
Generates new SSH host keys (RSA1, RSA and DSA). The keys are
used by all hosts in the cluster in accordance with the Single System
Image (SSI) concept, i.e. connections to the management IP address
(MIP) will always appear to a SSH client to be to the same host.
After having generated new SSH host keys, activate the new keys by
using the apply command.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007