Nortel 3050 Command Reference Manual page 448

448 Command Reference
Table 192
SNMP Notification Target Menu Options (/cfg/sys/adm/snmp/target) (cont'd.)
Command Syntax and Usage
version v1|v2c|v3
user <press TAB to view configured USM users>
del
/cfg/sys/adm/snmp/event SNMP Event Configuration
[Event Menu]
addmonitor - Adds a monitor
delmonitor - Deletes a monitor
addevent - Adds a notification event
delevent - Deletes a notification event
list - list current monitors and events
The Event menu is used to create custom monitoring definitions for the
objects in the DISMAN-EVENT-MIB. Start by defining a monitor for polling
an object from the MIB, then configure a value to which the polled object's
value should be compared. If a match is found, a corresponding event is
generated. The event sends an SNMP notification with information about
the monitor.
Table 193
Event Menu Options (/cfg/sys/adm/snmp/event)
Command Syntax and Usage
addmonitor
delmonitor <name of monitor>
addevent
Copyright © 2007 Nortel Networks
.
Sets the TCP port used by the SNMP manager.
The default value is port number 162.
Specifies the SNMP version used by the SNMP manager.
The default SNMP version is v2c.
If version 3 is selected (see the version command above), specify
the desired USM user (see
SNMPv3 Users Configuration" (page
Removes the current SNMP manager from the configuration.
Enter help addmonitor for on-screen instructions.
To delete a previously configured monitor, type the name of the monitor
following the delmonitor command.
Enter help addevent for on-screen instructions.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/cfg/sys/adm/snmp/users <number>
445)).