Nortel 3050 Command Reference Manual page 454

454 Command Reference
/cfg/sys/adm/auth/servers Authentication Servers
Configuration
[RADIUS Authentication Servers Menu]
list - List all values
del - Delete a value by number
add - Add a new value
insert - Insert a new value
move - Move a value by number
The RADIUS Authentication Servers menu lets you add one or more
RADIUS authentication servers to the configuration.
Table 197
RADIUS Authentication Servers Menu Options (/cfg/sys/adm/auth/servers)
Command Syntax and Usage
list
del
add <IP address> <TCP port number> <shared secret>
insert <index number to insert at> <IP address of RADIUS
authentication server to add>
Copyright © 2007 Nortel Networks
.
Lists the IP addresses of currently configured RADIUS authentication
servers, along with their corresponding index numbers.
Removes the specified RADIUS authentication server from the
configuration. Use the list command to display the index numbers of
all added RADIUS authentication servers.
Adds a RADIUS authentication server to the configuration. Specify
the IP address, a TCP port number, and the shared secret. The next
available index number is assigned automatically by the system.
For backup purposes, several RADIUS servers can be added. The
VPN Gateway will contact the server with lowest index number first. If
contact could not be established, the NVG will try to contact the server
with the next index number in sequence and so on.
Note: The default port number used for RADIUS authentication is 1812.
Assigns a specific index number to the RADIUS authentication server
you add. The index number you specify must be in use. RADIUS
authentication servers with an index number higher than (and including)
the one you specify will have their current index number incremented
by 1.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007