Nortel 3050 Command Reference Manual page 395

/cfg/vpn <id> /sslclient Net Direct and SSL VPN Client Configuration 395
Table 157
SSL VPN Client Menu Options (/cfg/vpn/sslclient) (cont'd.)
Command Syntax and Usage
ndlicense <license text>
oslist <comma separated list of allowed operating systems>
Copyright © 2007 Nortel Networks
.
Lets you enter or paste the banner text to be displayed when the user
starts the Net Direct client. If this command is ignored, the banner
screen will not be displayed.
The banner text screen will be displayed for the downloadable client as
well as for the installed Net Direct client.
Having entered/pasted the text, press ENTER and type three periods
(...). Finally press ENTER once again.
Below is an example of a banner text:
Welcome! You now have secure access to the intranet
through Net Direct. Do not leave your computer
unattended while connected!
Lets you enter or paste a custom license text to be displayed in Net
Direct's License agreement screen. The screen is displayed when Net
Direct is started.
This license text is not displayed for the installable Net Direct client.
Having entered/pasted the text, press ENTER and type three periods
(...). Finally press ENTER once again.
Note: A license text from Nortel is supplied by default. By entering a
new license text, you will replace the default license text. If desired, you
can copy and save the default license text before replacing it. To print
the default license text in the CLI (for copying), enter cur ndlicense.
If you do not want the License agreement screen to be displayed at all,
simply type three periods (...) and press ENTER. This will remove the
default license text or any previously entered or pasted custom license
text.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007