Nortel 3050 Command Reference Manual page 295

/cfg/vpn <id> /ipsec/ikeprof <id> IKE Profile Configuration
[IKE profile 1 menu]
name - Set IKE profile name
del - Remove IKE profile
enc - Encryption mask menu
dh -Diffie-Hellman group mask menu
pfs - Enable Perfect Forward Secrecy
vendorid - Enable Vendor Id Transmission
rekeytime - Set rekey time limit
rekeytraf - Set rekey traffic limit
retransmit - Set ISAKMP retransmit interval
maxretrans - Set ISAKMP max attempts retransmits
replaywins - Set replay window size
nat - NAT menu
deadpeer - Dead peer menu
The IKE Profile menu is used to configure the required settings for the IKE
(Internet Key Exchange) profile. If needed, several different IKE profiles
can be configured and mapped to different user tunnel profiles.
Table 106
IKE Profile Menu Options (/cfg/vpn/ipsec/ikeprof)
Command Syntax and Usage
name
del
enc
dh
pfs on|off
Copyright © 2007 Nortel Networks
.
/cfg/vpn <id> /ipsec/ikeprof <id> IKE Profile Configuration 295
Sets the name of the IKE profile. This name should later be
referenced in the desired user tunnel profile (see
/ipsec/utunprof User Tunnel Profile Configuration" (page
Deletes the currently selected IKE profile.
Displays the Encryption mask menu. To view menu options, see
"/cfg/vpn <id> /ipsec/ikeprof <id> /enc IKE Profile
Encryption" (page 297).
Displays the Diffie-Hellman group menu. To view menu options, see
"/cfg/vpn <id>/ipsec/ikeprof <id> /dh Diffie-Hellman Group
Configuration" (page 299).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/cfg/vpn <id>
302)).