/cfg/vpn <id> /aaa/auth <id> /radius/netattr RADIUS Network Attributes
If you want to use a standard attribute type (as defined in RFC 2865), set
the vendor id to 0. Then configure the desired standard attribute type as
the vendor type value.
Example: Set clntipid (vendor id for client IP address attribute) to 0. Then
set clntiptype to 8 (Framed-IP-Address attribute type).
Table 58
RADIUS Network Attributes Menu Options (/cfg/vpn/aaa/auth/radius/netattr)
Command Syntax and Usage
clntipid
clntiptype
clntmaskid
clntmaskty
primnbnsid
primnbnsty
secnbnsid
Copyright © 2007 Nortel Networks
.
Sets the vendor id for the client IP address attribute.
The default value is 1872 (alteon).
Sets the vendor type for the client IP address attribute.
The default value is 4.
Sets the vendor id for the client netmask attribute.
The default value is 1872 (alteon).
Sets the vendor type for the client netmask attribute.
The default value is 5.
Sets the vendor id for the primary NBNS server (NetBIOS Name
Server) attribute.
NBNS servers provide WINS (Windows Internet Naming Service) which
is part of the Microsoft Windows NT server environment.
The default value is 1872 (alteon).
Sets the vendor type for the primary NBNS server attribute.
The default value is 6.
Sets the vendor id for the secondary NBNS server attribute.
The default value is 1872 (alteon).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
Configuration 191