Nortel 3050 Command Reference Manual page 451

Table 194
Audit Menu Options (/cfg/sys/adm/audit) (cont'd.)
Command Syntax and Usage
dis
/cfg/sys/adm/audit/servers RADIUS Audit Server
Configuration
[RADIUS Audit Servers Menu]
list - List all values
del - Delete a value by number
add - Add a new value
insert - Insert a new value
move - Move a value by number
The RADIUS Audit servers menu is used for adding, modifying and
deleting information about RADIUS audit servers.
Table 195
RADIUS Audit Servers Menu Options (/cfg/sys/adm/audit/servers)
Command Syntax and Usage
list
del
add <IP address> <TCP port number> <shared secret>
Copyright © 2007 Nortel Networks
.
/cfg/sys/adm/audit/servers RADIUS Audit Server Configuration 451
Enables auditing, which means that CLI or BBI login, logout and update
events are sent to the event log, any configured syslog servers and to a
RADIUS audit server. The RADIUS server must however be configured
on the VPN Gateway (see
Audit Server Configuration" (page
Disables auditing, which means that no audit events will be generated.
Lists the IP addresses of currently configured RADIUS audit servers,
along with their corresponding index numbers.
Removes the specified RADIUS audit server from the configuration.
Use the list command to display the index numbers of all added
RADIUS audit servers.
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"/cfg/sys/adm/audit/servers RADIUS
451)).