Nortel 3050 Command Reference Manual page 29

Table 5
Information Menu Options (/info) (cont'd.)
Command Syntax and Usage
botuns <VPN ID> <prefix>
ippool <VPN ID>
ip <IP address>
Copyright © 2007 Nortel Networks
.
For a sample screen output, see
Note: This command is not available if the VPN Gateway software runs on
the ASA 310 or ASA 410 hardware platforms.
Shows the number of active branch office tunnel sessions for all VPNs. The
information includes branch office tunnel profile name, the NVG host from
which the tunnel is set up, the tunnel state, encrypted/decrypted data in
kBytes and session length.
Examples of argument usage:
>> Information# botuns
>> Information# botuns 2
>> Information# botuns 2 d*
>> Information# botuns 2
denver
For a sample screen output, see
35).
Shows IP pool allocations per IP pool and VPN. The information includes
configured IP address range, free IP addresses or ranges and currently
allocated IP addresses. It also shows which VPN Gateway (iSD) that owns
the IP address.
Examples of argument usage:
>> Information# ippool
>> Information# ippool 2
For a sample screen output, see
36).
Nortel VPN Gateway
Command Reference
NN46120-103 01.01 Standard
10 September 2007
"info/ipsec Ipsec Command" (page
Lists all currently active branch
office tunnels for all VPNs.
Lists all currently active branch
office tunnels for VPN 2.
Lists all currently active branch
office tunnels for VPN 2, whose
tunnel profile name begins with the
letter "d ".
Lists all currently active branch
office tunnels for VPN 2, whose
tunnel profile name is exactly
"denver ".
"info/botuns Botuns Command" (page
Shows IP pool allocations for all
VPNs.
Shows IP pool allocations for VPN
2.
"info/ippool Ippool Command" (page
Menu Summary 29
35).