Sensor Controller; Attaching The Ferrite Core - Omron ZS-L User Manual

Sensor Controller

This section describes installation of the Sensor Controller, and connection of the I/O
cable.
Before connecting/disconnecting peripheral devices, make sure that the Sensor Controller is turned
OFF. The Sensor Controller may break down if the Sensor Controller is connected or disconnected while
the power is ON.

Attaching the ferrite core

Attach the ferrite core (provided with the Sensor Controller) to the input/output cable of the
Sensor Controller.
Ferrite core
Section 2
Sensor Controller
ZS-L
User's Manual
2-3