Bank Settings
The ZG can hold up to 16 sets of settings, which are called a "bank". Bank 1 is displayed
as the default bank when the Smart Sensor is turned ON. Banks 2 to 16 are also provided
in addition to this.
Tasks and Bank Data p.38
Bank Switching (change of device setup)
The currently selected bank can be switched to other banks. Switching of banks is
instructed by operating Controller keys, external signals or communication commands.
FUN mode-[BANK]-[SWITCH]
Setting value
BANK1 to BANK16
Note
Switching banks by external signals p.112
Switching banks by communication commands p.134
Copying Bank Data
Settings of other banks can be copied to the current bank.
FUN mode-[BANK]-[COPY]
Setting value
BANK1 to BANK16
Important
After executing a bank copy, switch to the RUN mode once to save the settings. Settings are
cleared when the Smart Sensor is turned OFF after you just copy the settings.
88
Bank Settings
Description
Selects the target bank. (default value: BANK1)
Description
Selects the copy source bank. (default value: BANK1)
ZG User's Manual