Installation Overview - HP 70427A User Manual

Figure 1-3
CAUTION

Installation Overview

Installation
Example C
In a mainframe with no display linked to a mainframe with a display via
MS-IB. Requires MS-IB.
Linked to a Mainframe via MS-IB
Tools/equipment needed
Before installation, assemble these tools:
•
8mm Hex-ball driver, for locking the units into the
mainframe.
•
A small flat-head screw driver or similar object, for setting
MS-IB address switches.
•
HP MMS Manual for your display and/or mainframe.
Before proceeding, read the ESD warning at the beginning of this book.
Thoroughly read the connector care booklet enclosed, to ensure proper care
of the connectors.
The installation procedure for the HP 7042X varies depending on the
selected configuration. It may include one or more of the following major
steps:
1. Front and rear panel connector installation: installing connector savers,
50 ohm terminations, and type N to SMA adapter (if needed).
2. Preliminary work: checking line voltage, verifying MMS is already
functioning properly, and setting MS-IB address (if needed).
3. Mainframe assembly: installing unit into mainframe, and connecting
cables (if needed).
4. Verification: checking that the unit is working properly, using the
procedure and diagnostics described.
1-2 HP 70427A/HP 70428A User's Guide