HP 70427A User Manual page 222

HP 71707A
HP 70427A
General Specifications
HP 71707A System Components:
HP 70004A Color Display/Mainframe
❍
HP 70427A Microwave Downconverter Module
❍
Internal Reference Oscillator:
Internal 10 MHz reference oscillator:
❍
10 MHz quartz oscillator
▲
Aging rate:
❍
-9
<1x10 /day after 10 day warm-up
▲
Temperature Stability
❍
-8
<2x10 over 0 to 55° C
▲
Rear Panel Connections:
10 MHz IN (+7 dBm required)
❍
Buffered 10 MHz OUT (Typical +7 dBm)
❍
10 MHz OVEN OUT (Typical +10 dBm)
❍
100 MHz OUT (Typical −2 dBm)
❍
100 MHz OUT (Typical +8 dBm)
❍
600 MHz OUT (Typical +20 dBm)
❍
600 MHz OUT (Typical 0 dBm)
❍
TUNE SPAN OUTPUT (not specified)
❍
MULTIPLEXER OUT (not specified)
❍
TUNE OUTPUT (not specified)
❍
IF LEVEL (not specified)
❍
SPECTRUM ANALYZER FROM 11848A
❍
Allows the use of spectrum analyzer for RF, IF, and phase noise
▲
measurements without reconnection.
Environmental Temperature:
Operational, 0 to 55° C
❍
Storage, −40 to +75° C
❍
Humidity:
Operational, 0 to 95% relative humidity at 45° C
❍
Warm-up Time:
30 minutes recommended
❍
EMC:
Meets MIL-STD 461B
❍
Power Requirements:
HP 71707A supplied by the HP 70004 mainframe
❍
HP 70427 requires 50 watts from the mainframe
❍
HP 71707A/70427A Specifications
HP 70427A/HP 70428A User's Guide 9-21
Technical Data