Table of Contents
Advertisement
Overview
Figure 3-10
NOTE
Downconverter Operation
Spectrum Analyzer Connection System Control
Spectrum Analyzer Connection System Control
This procedure describes how to use the HP 70427A Downconverter
Module to route signals to the HP 3048A Phase Noise Measurement
system's RF spectrum analyzer.
Spectrum Analyzer Connection - System Control
With the RF spectrum analyzer and the HP 11848A connected to the
downconverter as shown above, the downconverter's input or IF can be
routed to the RF spectrum analyzer, or the HP 11848A can be routed to the
RF spectrum analyzer.
This procedure can be used for HP 3048A software versions A.03.00. The
software can be configured for system control of the downconverter.
This procedure assumes that the HP 3048A software has already been
configured for a phase noise using a phase-lock-loop measurement or an AM
noise measurement with the HP 70427A under system control.
3-40 HP 70427A/HP 70428A User's Guide
Advertisement
Table of Contents
