Table of Contents
Advertisement
Operating
considerations
Connectors and Indicators (Front- and Rear-Panel)
ERR indicator
ERR indicator
The error message indicator shows when an error occurs and that an error
message can be read.
To read error messages, press the
softkey. The error message(s) will be listed on the screen. Press the
repeatedly until "No Errors" is displayed.
ERRORS
Press
to return to the normal instrument display.
MENU
Error messages are erased as they are read. When all error messages are
erased the error message indicator will go out. If an error condition still
exists the message will re-appear. For example, if a phase-lock-loop is
unlocked you will get an out-of-lock message. After you read the error
message it will be cleared. If the loop is still unlocked, another out-of-lock
message will be generated and the error message indicator will light.
Messages can also be read over the HP-IB.
11-6 HP 70427A/HP 70428A User's Guide
key, then the
DISPLAY
REPORT ERRORS
REPORT
Advertisement
Table of Contents
