HP 70427A User Manual page 83

Getting Started
To Control the Source Over the HP-IB (IEEE 488.2)
Step 2 - Connect the HP-IB cable
Connect the cable from the computer to the MMS mainframe that the source
is installed in.
Figure 2-40 HP-IB Cable Connection
Step 3 - Enter a program and run it.
The following is for HP BASIC on an HP 9000 series 200/300 controller. It
sets the source's frequency and output power. Chapter 12 has a complete
table of HP-IB commands.
Figure 2-41 HP BASIC on a HP 9000 Series 200/300 Controller
2-38 HP 70427A/HP 70428A User's Guide