HP 70427A User Manual page 376

VIEW IN | IF | -
This softkey routes the downconverter's input signal to the front-panel RF
ANALYZER connector.
When
IF
amplifier to the RF ANALYZER connector. The IF output is
simultaneously available at the front-panel IF output connectors.
When
IN
attenuator to the RF ANALYZER connector. There will be no IF output.
When is underlined, the RF ANALYZER connector is routed to the
-
rear-panel SPECTRUM ANALYZER INPUT FROM HP 11848A
connector. The downconverter's signal follows its normal path to the IF
output connector.
Path
HP-IB command
Figure 10-86 HP 70427A
is underlined, the signal is routed from the downconverter's IF
is underlined, the signal is routed from the downconverter's input
Amplitudes VIEW IN|IF|-
or
AM Noise View IN|IF|-
DC:AMPL:VIEW 0 selects
DC:AMPL:VIEW 1 selects
DC:AMPL:VIEW 2 selects
HP 70427A/HP 70428A User's Guide 10-133
Softkeys and Displays
VIEW IN | IF | -
IF
IN
-