To Access The Downconverter Screen - HP 70427A User Manual

To Access the Downconverter Screen

Figure 2-4 Downconverter Screen Diagram
Step 1 - Make the downconverter the active module
Look at the ACT indicator on the HP 70427A's front panel. If it is lit, the
module is active and can be controlled by the MMS display. If it is not lit do
the following:
1. Press the
2. Press the
lights. If the MMS display is connected to more than one module, a
different module will become the active module each time the
INSTR
key.
DISPLAY
softkey until the HP 70427A's ACT indicator
NEXT INSTR
softkey is pressed.
HP 70427A/HP 70428A User's Guide 2-5
To Access the Downconverter Screen
Getting Started
NEXT