HP 70427A User Manual page 41

Figure 1-17
Figure 1-18
CAUTION
Installation
Verification
3. Enter 10.2 with the numeric keypad.
4. Then press the softkey.
GHz
Softkey Location
GHz
The module will display
display the output frequency.
HP 70428A Option 002 Verification
1. Press the softkey.
Source
Softkey Location
Source
2. Follow the instructions for standard HP 70428A verification.
If you are installing an HP 70428A Option 002 using an HP 8662A or
HP 8663A, additional softkey configurations are necessary. See procedure
A at the end of this chapter.
If you are installing an HP 70427A or HP 70428A into a mainframe with a
display, installation is complete.
After installation is complete, consult the operation guide for proper use of
the instrument.
1-14 HP 70427A/HP 70428A User's Guide
for a few seconds, then it will
standby:tuning