Characteristics
Operating
considerations
Figure 11-15
100 MHz OUT+8 dBm
The signal at this connector is an output of the 100 MHz oscillator.
•
Output impedance: 50
•
Phase noise: See Specifications.
•
Typical output power: +8 dBm
External tuning
This signal can be tuned by a voltage applied to the front-panel VOLTAGE
CONTROL connector.
Reference Chain
Connectors and Indicators (Front- and Rear-Panel)
Ω
HP 70427A/HP 70428A User's Guide 11-27
100 MHz OUT+8 dBm