HP 70427A User Manual page 291

Softkeys and Displays
Hardware Control
Hardware Control
This softkey displays a menu of hardware control choices.
The softkeys on this menu allow front-panel control of latches, relays, and
internal voltmeter measurement points normally controlled by the module's
firmware. The latches, relays, and voltmeter measurement points are
arranged in logical blocks. Blocks, latches, and voltmeter measurement
points are shown on the block diagram in chapter 13.
Path
Service
HP-IB command
See Also Chapter 8 - Advanced Hardware Control.
10-48 HP 70427A/HP 70428A User's Guide
Hardware Control
None.