Procedure
Figure 2-55
To Select Reference Chain Phase-Lock-Loop Bandwidth
To Select Reference Chain Phase-Lock-Loop
Bandwidth
1. Press the
REF Chain
2. Press the
Tune Sens
3. Note which sensitivity (on the right side of the screen) is underlined.
Tuning Sensitivity Softkey Locations
The 100 MHz and /or 600 MHz bandwidth can be set depending on the
tuning sensitivity.
Tuning Sensitivity
0 ppm
0.5 ppm/V
1.0 ppm/V
softkey.
softkey.
Bandwidth can be set for:
100 MHz and or 600 MHz.
phase-lock-loops
100 MHz and or 600MHz
phase-lock-loops.
600 MHz phase-lock-loop.
HP 70427A/HP 70428A User's Guide 2-51
Getting Started