To Select The Lo's Reference Chain Phase-Lock-Loop Bandwidth; Press The Ref Chain Softkey; Press The Tune Sens Softkey - HP 70427A User Manual

To Select the LO's Reference Chain Phase-Lock-Loop Bandwidth

To Select the LO's Reference Chain
Phase-Lock-Loop Bandwidth
Step 1 - Determine the tuning sensitivity setting
1. Press the
2. Press the
3. Note which sensitivity (on the right side of the screen) is underlined.
Figure 2-22 Reference Chain Phase-Lock-Loop-Bandwidth Diagram
The 100 MHz and/or 600 MHz phase-lock-loop bandwidths can be set
depending on the tuning sensitivity. See the following table:
softkey.
Ref Chain
softkey.
Tune Sens
HP 70427A/HP 70428A User's Guide 2-21
Getting Started