HP 70427A User Manual page 357

Softkeys and Displays
RELAY NUMBER
RELAY NUMBER
This softkey allows selection of a relay and then sets the relay's state with
the softkey.
RELAY STATE
The selected relay is shown on the
hardware block shown on the
Path
Service
HP-IB command
Where relay number is an integer form 0 to 15.
See Also Chapter 8 - Advanced Hardware Control.
10-114 HP 70427A/HP 70428A User's Guide
display. The relay is in the
Relay:
display.
Block:
Hardware Control RELAY NUMBER
relay number
DIAG:REL:NUMB