HP 70427A User Manual page 429

Remote Programming Commands
Table 12-7 TUNABLE SOURCE COMMANDS (HP 70428A Option 002 Only)
Command
TS:OUT:FREQ n
TS:OUT:FREQ?
TS:OUT:FFR n
TS:OUT:POW n
TS:OUT:POW?
TS:OUT:LO:FREQ n
TS:OUT:LO:FREQ?
TS:OUT:LO:FFR n
TS:OUT:LO:POW n
TS:OUT:LO:POW?
TS:LEV:RFS n
TS:LEV:RFS?
TS:RANG:MODE n
TS:RANG:MODE?
12-8 HP 70427A/HP 70428A User's Guide
Function
Sets the output frequency:
n= 2.4 to 26.4 GHz, in 0.1 Hz steps
Returns the output frequency
setting.
Sets the output frequency quickly
(without tuning the YTF trim DAC):
n= 2.4 to 26.4 GHz, in 0.1 Hz steps
Sets the output power:
n= 0.0 to 20.0 dBm, in 0.1 dB steps
Returns the output power setting.
Sets the LO frequency
n= 2.4 to 26.4 GHz, in 600 MHz
steps
Returns the LO frequency setting.
Sets the LO frequency quickly
(without tuning the LO YTF trim
DAC):
n= 2.4 to 26.4 GHz, in 600 MHz
steps
Sets the LO power:
n= 0 to 20 dBm, in 1 dB steps
Returns the LO power setting.
Sets a default RF source output
power:
n= 0 to 13 dBm,in 1 db steps
Returns the default RF source
power setting.
Selects an external RF source
range...
300-600 MHz: n= 0
120-300 and 480-600: n= 1
Returns the above range setting:
0,1
Equivalent Softkey or
Display
OUTPUT FREQ
Output:
OUTPUT POWER
OUTPUT POWER:
LO FREQ
LO:
LO POWER
LO
Power:
RF SRC PWR SET
RF SRC PWR SET:
Optimum Range