Bandwidths And Tuning Sensitivity - HP 70427A User Manual

Τ
Table 2-1
Figure 2-23
Getting Started
To Select the LO's Reference Chain Phase-Lock-Loop Bandwidth
The 100 MHz and/or the 600 MHz Phase-Lock-Loop Bandwidths and
Tuning Sensitivity
Tuning
Bandwidth Settings
Sensitivity
0 ppm 100 MHz and/or 600 MHz
phase-lock-loops
0.05 ppm / V 100 MHz and/or 600 MHz
phase-lock-loops
0.1 ppm / V 600 MHz phase-lock-loop
20 ppm / V None
100 MHz no 600 MHz phase-lock-loop
tune
600 MHz no None
tune
Step 2- Select Bandwidth
1. Press the softkey.
Ref Chain
2. Press either the
100 MHz PLL BW
3. Press the softkey that corresponds to the desired bandwidth.
Tuning the Sensitivity Setting Diagram
2-22 HP 70427A/HP 70428A User's Guide
or softkey.
600 PLL BW