Softkeys and Displays
State
State
This display shows the state of the relay shown on the
display.
Relay:
means the relay is in its normal state.
NORMAL
means the relay is not in its normal state.
OUT
Relay state is toggled by the
softkey.
RELAY STATE
Path
Service
Hardwre Control
HP-IB command
DIAG:REL?
Returns a 1 or 0 where 1=normal and 0=out.
See Also
Chapter 8 - Advanced Hardware Control.
HP 70427A/HP 70428A User's Guide 10-127