Installing The Clutch Push Rod; Installing The Oil Screens - Husqvarna FS 450 2019 Repair Manual

17 ENGINE
17.5.34
17.5.35
244

Installing the clutch push rod

Installing the oil screens

-
Lubricate the O-ring of the oil filter cover.
8.
-
Mount oil filter cover
-
Mount and tighten screws
Guideline
I I
Screw, oil filter cover
O.
-
Mount clutch push rod
✓ The rounded side of the clutch push rod faces the clutch .
Mount and tighten screw plug
and the O-ring.
Guideline
Screw plug, oil
screen
-
Position the long oil screen with the O-rings on a pin wrench.
-
Position the pin wrench through the drilled hole of the screw
plug in the opposite section of the engine case.
-
Push the oil screen all the way into the engine case.
-
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
8.
M6 110 Nm (7.4 lbf ft)
O
with the short oil screen
M20x1.5 15 Nm (11.1 lbf ft)
8
with the O-ring.
M20x1.5 15 Nm (11 .1 lbf ft)
..
..