Installing The Freewheel Gear; Primary Gear Wheel, Installing - Husqvarna FS 450 2017 Repair Manual

17 ENGINE
17.5.7
17.5.8
226

Installing the freewheel gear

primary gear wheel, installing

-
Mount the left section of the engine case. If necessary, strike
lightly with a rubber mallet.
Info
Do not use the screws to pull the two sections of the
engine case together.
8,
Mount screws but do not tighten yet.
Guideline
I I
Screw, engine case
@),
-
Mount screws but do not tighten yet.
Guideline
I I
Screw, engine case
- C,
Mount screws and tighten all screws in a crisscross pat­
tern.
Guideline
I I
Screw, engine case
-
Mount the O-ring on the countershaft.
Lightly grease and mount spacer Ci).
O.
-
Mount freewheel gear
O.
-
Mount woodruff key
-
Degrease the cone and thinly apply thread locker to it.
I Loctite 243
® ™
Mount primary gear wheel
Info
Turn the freewheel gear to ease engagement.
M6x60 1 10 Nm (7.4 lbf ft)
M6x70 1 10 Nm (7.4 lbf ft)
M6x80 1 10 Nm (7.4 lbf ft)
8.
...
...
...