Table of Contents
Advertisement
18 ENGINE
152
Mount and tighten screws ©.
Guideline
i
✓ Q
Screw, upper radiator bracket
M6
10 Nm (7.4 Ibf ft)
%
r i
D02786-11
Position the radiator hoses. Mount spring band clamps
Pliers for spring band clamp (60029057100) (81 p. 323)
IT*
8
Install the manifold. (6® p. 75)
Connect the battery. (81 p. 120)
-
v
i
J
i m
II
D02785-11
Remove filler plug © and the O-ring from the clutch cover, and fill up with
engine oil.
Engine oil (SAE 10W/50) (H p. 316)
Engine oil
1.70 I (1.8 qt.)
Ur
Install and tighten the oil filler plug with O-ring
m
* i
D02784-10
Finishing work
-
Fill/bleed the cooling system, (81 p. 235)
-
Install the engine guard. (88 p. 43)
-
Install the air filter box. (81 p. 80)
-
Mount the side cover. (81 p. 83)
-
Mount the seat. (88 p. 83)
-
Remove the motorcycle from the work stand. (81 p. 12)
-
Perform the initialization run. (81 p. 256)
-
Go for a short test ride.
-
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level. ( p. 238)
-
Check the coolant level. ( p. 237)
18.3
Engine disassembly
Clamping the engine into the engine assembly stand
Mount special tool O
on
engine assembly stand
©
18.3.1
Engine assembly stand (61229001000) (81 p. 324)
Q
©
Support for engine assembly stand (75012001060) (81 p. 325)
Holder for engine assembly stand (75012001070) (81 p. 325)
Mount the engine on special tool O-
Info
Have an assistant help you or use a crane.
I
/"
311725-10
_
Advertisement
Table of Contents
