Print From Usb; Photo Print - Fuji Xerox ApeosPort Print C5570 Reference Manual


After printing, always follow the procedure to remove the media.

Printing may take from several minutes to tens of minutes depending on the number of files or amount of data
on the media.

When a PDF file is printed, "PDF Bridge" is used, regardless of the "Print Processing Mode" settings under [PDF].
Refer

For more information on Print Processing Mode, refer to "Mode Menu Screen" (P.285).

Printing is possible from the customer's USB storage or USB cable (if necessary) using a USB host adapter, but
operation cannot be guaranteed.

Multiple USB storage devices cannot be installed and used simultaneously.

The performance of the following types of USB memory is not guaranteed.
- USB storage that has multiple media partitions that require separate utilities to access the contents of the USB
storage.
- USB storage connected via an external hub

Do not use media that stores music data with a copyright-protection function or other data that cannot be
backed up. Fuji Xerox is not responsible for any direct and indirect damages arising from or caused by data
corruption or loss.

Print from USB

1.
Insert USB storage into the USB storage insertion port.
Note

If the machine is in Power Saver Mode, exit this mode, and then insert the USB storage.

With the USB storage inserted, at the Home screen, tap [Print from USB], and then proceed to Step 4.
2.
Tap [OK].
3.
Tap [Print from USB].
4.
Check the document file to print from the target folder.
Note
 After the [Print from USB] screen appears, tap [Add File].
5.
Tap [OK].
6.
Configure functions if necessary.
Refer

For details, refer to "Function list" (P.77).
7.
Tap [Print].

Photo Print

1.
Insert USB storage into the USB storage insertion port.
Note
 If the machine is in Power Saver Mode, exit this mode, and then insert the USB storage.
 With the USB storage inserted, at the Home screen, tap [Photo Print], and then proceed to Step 4.
2.
Tap [OK].
76
4 Printing