Fuji Xerox ApeosPort Print C5570 Reference Manual page 253

Finisher-B3 (optional)
Important
 Finisher-B3 is only available when the optional 2 Tray Module or Tandem Tray Module is installed.
Tray type
Finisher tray: Collation (can be offset) / Stacking (can be offset)
Important
 The default factory setting is "Do not offset and eject". This can be changed to match your usage.
 Paper weighing 257 gsm or more and paper with a width of less than 210 mm is ejected without offsetting.
Paper size
Maximum: A3, 11 × 17"
Minimum: A5
Important
 Sizes larger than A3, 11 × 17" and sizes smaller than A5 are output to the center section.
Paper weight
52 to 300 gsm
Important
 It may not be possible to accommodate paper weighing 52 to 55 gsm or 257 gsm or more depending on the output
paper.
Tray capacity
With no stapling
A4: 2000 sheets
JIS B4 or larger: 1000 sheets
*1
Mixed stacking : 300 sheets
With stapling
A4: 100 copies or 1000 sheets (for 1 location); 75 copies or 750 sheets (for 2 locations)
JIS B4 or larger: 75 copies or 750 sheets
For booklets/creasing
When a fold is made
*1 : Large-sized paper is loaded on small-sized paper.
*2 : The optional Booklet Maker Unit for Finisher-B3 is required to use the booklets/creasing feature. Paper is creased to make it easier
to fold. The next job may not be output if the paper in the tray is not removed after output specifying booklets or double folding.
In addition, ejection may not be performed if the paper is not removed from the tray in the case of output that specified booklets
or creasing on a small size.
Important

64 gsm paper
Stapling
Maximum number of sheets for stapling: 50 sheets (90 gsm or less)
Staple paper sizes:
Maximum: A3, 11 × 17"
Minimum: A5
Staple paper weight: 52 to 256 gsm
Staple locations: 1 location, 2 locations
*2
: 50 copies or 600 sheets
*2
: 500 sheets
11.1 Specifications
253