Delayed Start; Print From Usb Defaults - Fuji Xerox DocuPrint M255 z User Manual

• Delayed Start

Purpose:
This feature enables you to set a specific time for the fax transmission to start. Once Delayed Start
mode is activated, your printer stores all of the documents to be faxed into its memory and sends them
at the specified time. After faxing in the Delayed Start mode is complete, the data in the memory is
cleared.
Values:
21:00*/PM 9:00*
0:00 - 23:59 / AM/PM 1:00
- 12:59
* Factory default menu setting
NOTE:
• A maximum of 19 delayed fax jobs can be stored in this printer.

Print from USB Defaults

Use the Print from USB Defaults menus to configure the Print from USB Memory feature.
• 2-Sided
Purpose:
To specify whether to print on either side of paper.
Values:
1->1-Sided
Flip on Long Edge*
Flip on Short Edge
* Factory default menu setting
• Layout
Purpose:
To specify the output layout.
Values:
1UP*
2UP
4UP
* Factory default menu setting
Specify the fax transmission start time when sending a fax at a
specified time. Which factory default menu setting displays depends
on the value set for Time Format under the System Settings
menu. See "Changing the Clock Mode" on page 248
information.
Prints on a single side of paper.
Prints on either side of paper to be bound on the long edge.
Prints on either side of paper to be bound on the short edge.
Using the Operator Panel Menus and Keypad
for more
327