Fuji Xerox ApeosPort Print C5570 Reference Manual page 145

Note

For details, refer to "Adjusting alignment" (P.193).
[Adjust Image Transfer]
If the toner image is not transferred to the paper optimally, you can configure the optimal transfer output value for
each paper type.
Note
 For details, refer to "[Adjust Image Transfer]" (P.145).
[Calibration]
You can easily adjust the gradation when the color gradation deviates in the print quality.
Refer
 For details, refer to "Print Image Manual Density Adjustment (Unevenness Adjustment on the Manual Print Side)"
(P.198).
[Density Uniformity Adjustment]
Adjust density unevenness of output images printed on paper.
Refer
 For details, refer to "Print Image Manual Density Adjustment (Unevenness Adjustment on the Manual Print Side)"
(P.198).
[Hole Punch Tool]
Configure the type of the installed punch kit.
[Adjust Booklet Fold Position]
Configure booklet fold locations individually for smaller than B4 and B4 or larger.
Refer

For more information, refer to "Adjusting the booklet fold position" (P.200).
[Adjust Punch Position]
Configure punching locations individually for smaller than B4 and B4 or larger.
[Adjust Fold Position]
You can adjust the paper folding positions by paper type and configure 10 types. Configured types are assigned to
each tray.
Refer
 For more information, refer to "Adjusting the fold position" (P.201).
[Fold Assisting Crease]
Lines can be added to assist folding if booklets open during binding.
Note
 The booklet making speed becomes slower as the number of lines increases.
 Booklets may open erroneously even when a line has been added to assist folding depending on the paper size and paper
type.
145