Fuji Xerox ApeosPort Print C5570 Reference Manual page 123


[Port Number]
Configure the port number of Port 9100.
Note

Do not use a number that is being used by another port.
[SNMP]

[Port Status]
Configure [Enabled] when SNMP is used, for example, to use our application to manage this machine over a
network.
[Receive Email]

[Port Status]
To receive email, configure to [Enabled]
[Email Notification Service]

[Port Status]
To use the email notification service, configure to [Enabled]. An email notification service reports the machine status
via email.
Note

The reported machine statuses are: [Supplies Status], [Parts Status], [Paper Tray Status], [Output Tray Status], [Jam
Status], [Door / Cover Status], and [Error].

Configure the email notification service settings using CentreWare Internet Services. For more information, refer to the
CentreWare Internet Services Help.
[UPnP Discovery]

[Port Status]
To use UPnP, configure to [Enabled].

[Port Number]
Configure the port number used for UPnP.
Note

Do not use a port number that is already being used by another port. However, the same port numbers as the ports that
use HTTP (IPP, Internet service (HTTP), UPnP discovery, SOAP, and Web Services on Devices (WSD)) can be used.
[WSD]

[Port (Print from Desktop)]
To use WSD (Web Services on Devices) print, configure to [Enabled].

[Port Number]
Configure the port to be used for WSD (Web Services on Devices) communication.
Note
 Do not use a port number that is already being used by another port. However, the same port numbers as the ports that
use HTTP (IPP, Internet service (HTTP), UPnP discovery, SOAP, and Web Services on Devices (WSD)) can be used.
[Internet Services (HTTP)]

[Port Status]
To use CentreWare Internet Services, configure to [Enabled].
123