Fuji Xerox ApeosPort Print C5570 Reference Manual page 268


When paper is A3 and the origin position is the lower left
Standard
The printable area of this machine becomes the hard clip area.
Paper
The size of the paper becomes the hard clip area.
Auto Layout
The print area is determined automatically from the document size, output size, and other configured items.
Document Size
If [Auto] (default value) is configured, the [Auto Layout] setting turns on.
Auto Layout
If [ON] (default setting) is configured, [Zoom], [Zoom Mode], [Area Determine Mode], and [Paper Margin] are
turned on.
Zoom
Enlarge or reduce the print area so that the area of the object to be drawn matches the output size.
Zoom Mode

Output Size
The document size is determined from the area of the object to be drawn. The sizes to be determined are the A-
series sizes (6 types from A0 through A5).

Object area
The document size is determined based on the origin location of the object area to be drawn.
268
11 Appendix
+Y
(0, 0)
Standard origin
(0, 0) Paper origin
Output size (= paper hard clip area)
Printable area (= standard hard clip area)
(16798,11876)
Height
(16442,11520)
Width
+X