Fuji Xerox ApeosPort Print C5570 Reference Manual page 269

Area Determine Mode
Note

When there is no command, the object area is determined by Adapted.

Automatic
Selected automatically in the following order of priority: PS > IW > IP > Adapted.

PS
The area including the area specified first by the PS command becomes the object area.

IW
The area specified by the final IW command in the data becomes the object area.

IP
The area specified by all IP commands becomes the object area.

Adapted
The object area is determined automatically.
Paper Margin
Configure the margins.
Pen Attributes
Configure the pen to draw the boundary line of the hard clip area.
16 pen types (No. 00 through No. 15) can be configured.

Width
When an image is reduced by combining the [Document Size] and [Output Size] settings, the pen width is also
reduced.
The line width is increased from the center of the line.
When the thickness is 0.0 mm, nothing is drawn.
Note

This item is turned off for text that does not have a [Font] of [Stroke].

Pen end shape
Configure the end shape of the pen.
Note
 This item is turned off for text that does not have a [Font] of [Stroke].

Pen connection shape
Configure the processing when pen lines were connected.
Note

[None] requires the shortest processing time and therefore is suitable for checking.

When a symbol is configured by a symbol mode command, link processing is not performed. Symbol mode command
refers to an HP-GL command that specifies a symbol.
 This item is turned off for text.

Pen color
Pen color is indicated by RGB.
269
11.5 Emulation