Fuji Xerox ApeosPort Print C5570 Reference Manual page 206

2.
Rotate the handle of the conveyance box counterclockwise.
3.
Pinch and hold the knob on both sides of the conveyance box and remove the box.
Note

Stand the box upright on a level surface.
4.
Remove the cleaning bar from the back side of the front cover, and then clean each of the LED printheads with
the bar.
While holding the cleaning bar with the arrow facing up, insert the cleaning bar into each slot until it stops, and then
slowly slide the bar back out.
206
8 Maintenance