[App Settings] - Fuji Xerox ApeosPort Print C5570 Reference Manual

If this item is turned off, firmware cannot be downloaded even when [Software Download via Network] has been
configured to [Enabled]. If this item is turned on, and [Software Download via Network] has been configured to
[Disabled], download via USB only is permitted.
Note
 [Software Download via Network] is configured by Quick Setup when this machine is first started or by CentreWare
Internet Service.
[Drum Cartridge Conservation Mode]
Configure operation when [Output Color] was configured to [Auto].
[Data Indicator]
Configure the lighting pattern of the data lamp.
[Paused Job Handling]
Configure whether to resume a job automatically, stop a job automatically, or pause temporarily until the user
restarts operation when operation of a started job was stopped midway and left for the time specified for [Auto
Clear].
[First Page Printing Optimization]
Configure the machine to standby in color print or black-and-white print mode. Configuring a frequently used color
mode improves print speed.
[End of Drum Life]
Configure whether to cancel printing when the drum cartridge has reached its replacement cycle.

[App Settings]

[Print Settings]
[Allocate Memory]
Important

Memory is reset when its capacity is changed, and all data stored in each memory area is erased.
Note
 If a port is configured to [Disabled], the corresponding items are not displayed.

[PostScript Memory]
Specify the usage memory capacity of PostScript.

[ART IV, ESC/P, 201H Form Memory]
Configure the work memory area when using forms with ESC/P. When storage (optional) is attached, the storage
(optional) is specified and cannot be changed. If storage (optional) is not installed, specify the work memory area.

[HP-GL/2 Auto Layout Memory]
Set the working memory area when using the HP-GL/2 Auto Layout feature. If storage (optional) is installed, the
storage (optional) is specified and cannot be changed. If storage (optional) is not installed, specify the working
memory area.

[Job Ticket Memory]
Specify the memory capacity to be used for processing of job tickets (that describe the number of output copies,
postprocessing, etc. of jobs).
115