Fuji Xerox ApeosPort Print C5570 Reference Manual page 132


[LDAP Referrals]
Configure whether to reconnect to the specified server when a connection to another LDAP server was specified
from the connected LDAP server.

[LDAP Referral Hop Limit]
Configure how many switches of the connection server are permitted when using the referral function.
[SMB Server Settings]
Configure when using an SMB server as an external authentication server.

[SMB Server Setup]
The server specification method can be configured from [By Domain Name] and [By Domain & Server Names / IP
Address].
Configure the following settings for SMB Server 1 through 5 individually to match the specification method
configured here.
The content configured for SMB Server 1 is used as the default during authentication.

[SMB Server 1 (Default)] to [SMB Server 5]

[Domain Name]
Configure the domain name of the server.
A domain name setting is required regardless of the specification method of the SMB server configured by [SMB
Server Setup].
Note

For the domain name, specify the NetBIOS domain name or active directory domain name.

[Server Name / IP Address]
Specify the server name or IP address of the server.
Note
 For the server name, specify the NetBIOS computer name or full computer name with DNS suffix.
[Security Settings]
[SSL/TLS Settings]
Configure when encrypting communication between a server or client computer and this machine.

[Device Certificate - Server]
Configure the server certificate for SSL/TLS communication.

[HTTP - SSL/TLS Communication]
Set whether or not to only allow the use of SSL/TLS communications.
Note

When set to [Enable HTTPS Only], the [UPnP Discovery] and [WSD] ports stop.

[HTTP - SSL/TLS Port Number]
Configure the port number for SSL/TLS communication.
Note
 Do not use a number that is being used by another port.

[SMTP - SSL/TLS Communication]
Configure the SSL/TLS communication settings.

[ThinPrint - SSL/TLS Communication]
Configure whether to turn on SSL/TLS communication.
132
6 Changing the Machine Settings