• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
2 mm*/0.1 inch*
0-50 mm/0.0-2.0 inch
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0 mm*/0.0 inch*
0-50 mm/0.0-2.0 inch
• Image Compression
Purpose:
To specify the image compression level.
Values:
Higher
Normal*
Lower
Print from USB Defaults
• Layout
Purpose:
To automatically enlarge print documents when you print directly from a USB storage device.
Values:
Auto*
Off
155
Using the Operator Panel Menus and Keypad
Specify the value in increments of 1 mm/0.1 inch.
Specify the value in increments of 1 mm/0.1 inch.
Sets the image compression level to Higher.
Sets the image compression level to Normal.
Sets the image compression level to Lower.
Automatically enlarges print documents to fit on the paper.
Does not enlarge print documents.