Installing Print Drivers On Linux Computers; Email Function Settings - Fuji Xerox ApeosPort Print C5570 Reference Manual

Installing Print Drivers on Linux Computers

The latest print drivers for Linux computers can be downloaded from our official web site.
The latest drivers can be downloaded from the following URL:
http://www.fujixerox.com

Email function settings

To use E-mail Notification Service, Mail Print, and other functions that use e-mail, the following settings must be
configured.

Email port

TCP/IP address

Subnet mask (configure if necessary)

Gateway address (configure if necessary)

DNS server address (configure if necessary)

Machine's E-mail Address

Email receiving protocol

SMTP server address

SMTP AUTH login name and password (configure is necessary)

POP3 server address (configure if necessary)

POP3 login name and password (configure is necessary)
Refer

For TCP/IP address settings, refer to "Changing the IP address" (P.32).
Configuring email notifications
1.
Tap the display area of authentication information at the top left of the Home screen, and then login as a
machine administrator.
2.
Tap [Device].
3.
Configure the email address of this machine.
1)
Tap [Connectivity & Network Setup] > [Device's Email Address / Host Name].
2)
Configure the email address and host name.
Refer

For details, refer to "[Device's Email Address / Host Name]" (P.126).
3)
Tap [<] to return to the [Connectivity & Network Setup] screen.
4.
Configure the sending settings.
Note

The SMTP server settings must be configured to send e-mail. When [Protocol to Receive Email] is [POP3], configure the
SMTP server by [Outgoing / Incoming Email Settings]. For details, refer to "[SMTP Server Settings]" (P.129).
5.
Tap [<] to return to the [Connectivity & Network Setup] screen.
6.
Press the <Home> button.
30
2 Setting Up the Machine