Fuji Xerox ApeosPort Print C5570 Reference Manual page 282

Setting
Zoom
Zoom Mode
Area Determine Mode
Paper Margin
Specify extension
Extension
Form Overlay
Note
 This setting is not
applied by extension
commands sent from
users.
Stapling
Temporary stoppage of
bypass paper feeding
Form type
Punching
282
11 Appendix
Item No.
ESC PCL HP
- - 159
- - 160
- - 161
- - 162
62 - -
63 - -
64 - -
66 - 164
67 - 165
68 - -
69 - 166
Setting value
[0]: OFF
[1] (Default): ON
[0] (Default): Output Size
[1]: Object area
[0] (Default): Automatic
[1]: PS
[2]: IW
[3]: IP
[4]: Adapted
[0] to [99] (Default: 0): 0 to 99 mm
[0] (Default): Off
[1]: On
Note
 For a normal extension command, specify ESC (1BH in
hexadecimal) followed by a ";" (semicolon or 3 BH in
hexadecimal) at the beginning as an extension to identify
the command.
When the ESC code or a semicolon cannot be used at the
host computer, you can use a special character string in their
place as an extension.
[&%] (Default): 0×21 to 0×7e
Note
 Specify the extension of the extension command (first two
bytes) to enable restriction by text code. Enter two
characters from the keyboard that appears on the screen.
[0] (Default): Off
[1] to [64]: No.1 to No.64
Note
 Even if the form is deleted after it has been specified, that
form name is shown. In this case, the form is not overlaid.
[0] (Default): Off
[1]: 1 top left
[2]: 2 upper side
[3]: 1 top right
[4]: 2 left side
[5]: 2 right side
[6]: 1 bottom left
[7]: 2 bottom side
[8]: 1 bottom right
[0]: (Default) Off
[1]: On
[0] (Default): ESC/P
[1]: ART IV
[0] (Default): Off
[1]: Upper side
[2]: Bottom side
[3]: Left side
[4]: Right side