Fuji Xerox ApeosPort Print C5570 Reference Manual page 283

Setting
Number of punch holes
Char. Code
Specification text
example of binary data
(entering command in
hexadecimal)
0 Style
HexDump
Print as Gray
End of line processing
Default of user-defined
paper size
Effective output
quantity
Barcode Mode
Target machine
Pen width
Item No.
ESC PCL HP
70 - 167
71 - -
72 - -
73 - -
- 214 -
- 215
- 218 -
- 219 -
(Short
Edge
Feed)
- 220 -
(Long
Edge)
74 221 115
75 - -
- - 169
- - 800 to
815
Setting value
[0] (Default): 2 holes
[1]: 3 holes
[2]: 4 holes
[0] (Default): JIS
[1]: ShiftJIS
[0] (Default): OFF
[1]: &$%$
[2]: $?!#
[0] (Default value): 0
[1]:
[0] (Default): OFF
[1]: ON
[0] (Default): OFF
[1]: ON
[0] (Default): OFF
[1]: Add LF to end
[2]: Add CR to beginning
[3]: CR-××
Note
 "CR-××" adds a line feed to the end in the case of a carriage
return, and adds a carriage return to the beginning in case
of a line feed and form feed.
[0] to [9999] (Default: 2100): 0 to 999.9 mm
[0] to [9999] (Default: 2970): 0 to 999.9 mm
[0] (Default: HP-GL/2): Protocol specification
[1]: Panel
[2]: (Default: ESC/P, PCL): Command
[0] (Default): Normal mode
[1]: Barcode Mode
Note
 If Barcode Mode is configured, a barcode outline is printed
clearly.
[0] (Default): HP750C
[1]: FX4036
The item number of No. 00 is 800.
[0] to [255] (Default:3): 0 to 25.5 mm
283
11.5 Emulation