Fuji Xerox ApeosPort Print C5570 Reference Manual page 130

[Kerberos Server Settings]

[Kerberos Server 1 (Default)] to [Kerberos Server 5]
Configure the following settings for Kerberos Server 1 through 5 individually.
The content configured for Kerberos Server 1 is used as the default values during authentication.

[Primary Server Name / Address]
Specify the server name and IP address of the primary server.

[Primary Server - Port Number]
Configure the port number of the primary server.
Note
 Do not use a number that is being used by another port.

[Secondary Server Name / Address]
Specify the server name and IP address of the secondary server.

[Secondary Server - Port Number]
Configure the port number of the secondary server.
Note
 Do not use a number that is being used by another port.

[Domain Name]
When a Windows Server active directory will be used as a server, specify the domain name of the active directory
to the authentication destination.
Note
 Always configure the authentication destination name using uppercase characters. If lower case characters are
configured, an authentication error occurs.

[Server Certificate Verification]
Configure whether to verify server certificates.
[LDAP Server Settings]
Configure the server and authentication method to use LDAP authentication.
You can check the connection status between the machine and the LDAP server by tapping [Connection Test]. In
addition, if [Connection Test] > [Print LDAP Comm Report] is selected, a report is output that displays the content of
the protocol of LDAP communication sent and received by the machine.

[Primary Server Name / Address]
Specify the server name and IP address of the primary server.

[Primary Server - Port Number]
Configure the port number of the primary server.
Note

Do not use a number that is being used by another port.

[Secondary Server Name / Address]
Specify the server name and IP address of the secondary server.

[Secondary Server - Port Number]
Configure the port number of the secondary server.
Note
 Do not use a number that is being used by another port.

[Authentication Method]

[Direct Authentication]
130
6 Changing the Machine Settings